Power bank for Iphone,ipad,ipod The portable power has many
multifunction, along with high capacity power for charging your battery. It has the
capability of charging a variety of hand-held electronic device quickly, and has a LED
lighting function notifying you when it is charging. The portable power pack is very
resourceful, and maintains power to your hand-held devices during your traveling.
Here are the following instruction to guide you, before you use the power pack. Read
carefully for better usage of the device.
Illustration:
Discharge indicator light
Power LED indicator
Micro SD port
Power level button
LED lighting
USB port
Product Feature
1. Large capacity:5000Mah18.5WH
2. Supply large current 1000mAH when charge for other products
3. Send a charge line which is same as the original Apple line
4. Whole plate circuit fully comply with the charge standard of Apple products.
Such as: iPhone,i Pad, iPod, etc.
5. It is compatible with 7 commonly use mobile connectors, and can supply
power for most mobiles and hand-held devices.
6. Built-in high power LED, is very convenience when using this device.
7. Full-automatic turn off control switch, and you well find it very simple to
operate.
8. Small size, super thin body and easy to handle design, make it easy to carry
any where.
Specifications:
Battery capacity:(Lithium battery):5000mAh/3.7V
Input voltage: DC 5V(6.5V ,MAX)
Input current: DC 500Ma-1000mA
Output voltage: DC5.2V
Output current: CD20mA-1000mA
Static current: <0.1mA
Charging time(1000mA):6.5H
Rate of changing electrical energy:>85%
Power LED: 0.5W
Function:
The function as below:
A. Power level button (LED lighting button)
B. A discharge LED indicator and four power LED indicators
C. Standard A terminal male USB output port
D. Micro USB charge port
E. Large power LED lighting
Operation instruction
1. Power level(Don’t connect other products)
Touch the power level button, the four indicators show the current power.(If the LED
isn’t on, which mean THE POWER have been on the protection condition or power is
off. You can activate device with Micro USB line or power adapter)
A. The first LED flash, it means lower power and need to charge in time
B. One LED light it have one grid of electricity, power <25%
C. Two LED light :it have two grid of electricity ,power 25%-50%
D. Three LED light :it have three grid of electricity ,power 50%-75%
E. Four LED light :it have four grid of electricity ,power >75%
The above LED light 3 to 5 seconds
2.,Output power to other devices
A ,When usb cable to usb interface is connected. The product will started
automatically within boost circuit, and discharge indicator LED turn on. Indicating
that the external devices is charging. Removing usb device will automatically within
3-5 second indicate that it has stop charging .
B.When charge is completed in the external devices , this product indicator LED will
be turn off.
C. When charging for external devices , and circuit inspect battery power is less than
setting value ( about 3%) . The first LED light will flash automatically within 3- 8
second, and closing external devices automatically at same time. Make sure that you
keep enough power to keep battery up and ready to use at all time for better uses.
3.Input power
When Micro USB line insert the product, LED will light and flash show the current
power. Pls refer to “the power state instruction”.(when four LED flash together, which
mean power through Micro USB line don’t comply with the standard of the product.
Pls change the power source before changing again.)
4. Lighting LED indicator function:
When press ( 2- 3 second) power-level bottom , and high –frequency light will turn on.
Turn off LED, press (2-3 second) the bottom turns off.
5. B. To improve practicability and security , the product has much functions :
over-current, over-voltage, over-charge and overload.
Accessories:
One Apple usb cable
One Micro USB charging cable
Six piece of Phone adaptor
One Manual
Notice Items:
1) When u use it , this product cover will turn a little heating , whiich belong to normal regular
phenomenon .
2) When u don’t use it , it is best that to charge it each 3 monthes to keep battery useful time.
3) Pls check power before use , try to keep full power to keep using next time.
4) Please keep the product in a day area, and get away humidity and corrosion materials
5) In order to make the product work normally , please don't use the product in moist
environment.
6) Please don't open the product if u are not our company engineer.